Audio / AMP över IP, 50W/kanal, Mottagare

Logga in för att se priser och lagerstatus.


Muxlab 500755-AMP-RX är en mottagare för att ta emot 2 kanals ljud och / eller en mic över ett nätverk.

Med 2x50W som kan bryggas till en 1x100W utgång så är det relativt lätt att få upp en högtalare på nya platser.

The Audio / AMP over IP Extender Kit, with Mic & AMP 50W/CH consists of a Transmitter (500755-AMP-TX) and a Receiver (500755-AMP-RX), sold as a Kit or separately, allowing a one of two 2CH analog audio-in and Mic-in signals to be extended over an IP network, and up to 330ft (100m) from an Ethernet Switch via Cat5e/6 cable in a point-to-point configuration. Point-to-multipoint and multipoint-to-multipoint is supported by connecting several Transmitters and Receivers to the same local Ethernet network. Depending on the application one or more Transmitters (500755-AMP-TX) can communicate with (or multicast to) multiple Receivers (500755-AMP-RX).The Transmitter supports PoE (PD) if used with a PoE (PSE) Ethernet Switch. Supports bidirectional RS232 and directional IR transmission initiated via an IP network or via pass-through for remote control of end devices.


Extend 2CH Audio or Mic signals up to 330ft (100m) over Cat5e/6 cable
Supports a 2x50W Amplifier, and bridge-mode for 1x100W (RX)
Supports Digital Audio Out (RX)
Manage TX locally via push/turn dial or remotely via 500811 Pro Digital Network Controller web interface
Compatible with 500755-70V for 70V speaker systems
Supports point-to-point, point-to-multipoint and multipoint-to-multipoint applications
Supports 100’s of Transceivers depending on network bandwidth
Supports RS232 and IR transmission for remote control of end devices
Transmitter may be PoE powered